Synclastics: Puts two curvatures into flat stock simultaneously
without marring. Create a bracelet in minutes, not hours. Also makes
rings, bangles and is indispensable in doing jewelry repair.
More info and ordering
View Demo |
|
Anti-Clastics:
Similar to the Synclastic tools but produces a concave curve instead of a convex
curve. Previously you had to use a dapping tool which was time consuming and did not
produce a fine, finished product.
More info and ordering
View Demo
|
|
Cylinder
Anti-Clastics: Similar to the
Anti-Clastic tools but available in more sizes for working with very narrow and very wide
metal. Can also put a single curvature into metal. Second curvature can be
introduced by forming metal around cylinder with thumb.
More info and
ordering View Demo |
|
Dimplers:
Puts precise, circular indentations and domes into metal for decorative purposes.
Partial indentations can also be achieved by using the tool on the edge of the metal as
shown in picture on the right.
More
info and ordering View Demo |
|
Hole Punchers: Replaces
drill, which can wander, grab, break and heat metal. Small size is perfect for
earrings. Larger sizes can punch a hole through a penny. Also used to make
equal sized metal snippets for welding. Optional capture tube collects precious
metal.
More
info and ordering View Demo |
|
Sheet Metal
Break: Used to bend clean angles
into metal stock. Unlimited applications for silversmiths and arts & crafts.
The 2 inch wide bending jaws are made of smooth, polished but very strong steel.
Click for more Information and to Order |
|
Double Flush Cut with Gauge: Cuts (shears) wire up to 8 gauge in size,
including half round, square, etc. Leaves both ends flush instead of pinching
them. Eliminates waste and the need for filing. Adjustable gauge allows you to
cut multiple pieces of the same length.
More info and ordering
View Demo |
|
Metal Shear: Heavy Duty metal cutter for shearing metal with
minimum effort. Cuts a penny in half with ease.
Click for more Information and to Order |
|
Prong Setter: Used to bend over prongs for setting and tightening
stones.
Click for more Information and to Order |
|
Double
Cylinder Bracelet Makers:
Two different sized cylinders are used to quickly put large radius
curves into flat metal stock. Result can easily be resized on a mandrel, if
desired. Perfect for for making men's and women's bracelets.
More Info and Ordering
View Demo |
|
Channel Bracelet Makers: Used
to put a single, large radius curve into flat metal stock. Result can easily be
resized on a mandrel, if desired. Makes men's and women's bracelets and is perfect
for jewelry repair.
Click for sizes and to Order |
|
Double
Cylinder Ring Makers: Two different sized
cylinders are used to put medium radius curves into flat metal stock and wire.
Result can easily be resized on a mandrel. Perfect for for making rings, earrings
and children's bracelets.
Click for sizes and to Order |
|
Channel Ring Makers: Puts
a single, medium radius curve into flat metal stock and wire. Result can easily be
resized on a mandrel, if desired. Makes rings, earrings, child's bracelets and is
perfect for jewelry repair.
Click for sizes and to Order |
|
Double
Cylinder Metal Wraps: Puts precise curvatures
into wire and flat metal stock. Perfect for forming bales, earring hooks, jewelry
repair and other applications. Similar to Double Cylinder Ring Maker and Double
Cylinder Bracelet Maker but comes in smaller sizes.
Click for sizes and to Order |
|
Texture Hammers: Textures flat
metal and wire. Three different faces are available. The back end is flat and
polished, like having two hammers in one. The beautiful patterns these hammers put
into metal have to be seen to be appreciated.
Click for patterns and to Order |
|
Tool Clamp: Allows bench mounting of hand tools.
Tool is operated using shoulder muscles instead of your hand, allowing for higher volume
use.
More info and
ordering
|
|
Plier
Photographs by Greg Sims Tri-Digital Group |